4 U Pure Water (PTY) Ltd HQ - Products
For use on Farms, Homes, Business. Water Softener
Send an e-mail enquiry to 4 U Pure Water (PTY) Ltd HQ
Removes all lime hardness, impurities, etc. Flow rate of 100 L per minute - 1000 L per minute.
Permanent - no chemicals Reduces soap and detergent costs, leaving you with tastier drinking water, shinier hair, healthier skin, soft laundry as well as sparkling dishes and glassware.
The Automatic Water Softener fitted with Clack simplex timer controller, series is fully automatic and does not have to be regenerated physically as the unit regenerates automatically. To regenerate automatically the unit needs 220 Volt electricity and a minimum water pressure of 1.5 bar, or a head height of 15 meters (45 feet). If the pressure from the tank is insufficient, the unit will regenerate inadequately, and a pressure booster pump must be used. The pressure booster pump must be installed before the water softener unit. This will ensure pressure on the control and also through out the house to all taps. The Automatic Water Softener mode fitted with Clack simplex timer controller also comes in various models that differ in size: 14000 Litres Per Cycle 20000 Litres Per Cycle (and bigger) The most popular unit of the automatic water softener mode fitted with clack simplex timer controller series, for water from boreholes with aboce average hardness, is the which is able to soften extremely high lime (calcium) content completely. For a high usage of water above average hardness we recommend the model . The automatic water softener mode fitted with clack simplex timer controller offers the most advanced water softeners. These regenerate more effectively, and use only 5kg of the salt that is drawn from the brine-tank. The water softener withdraws all positive ions from the water - ie: calcium (lime), magnesium salts and dissolved minerals that cause hardness. The soft water compares favourably with rain water and offers much pleasure and advantages for household and human use. Automatic Water Softener model fitted with Clack simplex timer controller(PS) series high performance water softeners guarantee a wide range of features and control options to satisfy your needs, High quality fabrication materials and manufacturing conditions guarantee a superior product. These softeners designed to be high Quality hardness (Calcium and Magnesium) removal in various water treatment applications. The Automatic Water Softener model 255-450 fitted with Clack simplex timer controller(PS) series are designed and fabricated for domestic, commercial, and industrial applications. The standard vessels used are vertical cylindrical design of fiber-glass reinforced polyester material and all used vessels are in line with International testing and certification agencies such as NSF & ASME. All Softeners are sized in accordance to optimum recommended flux rates for optimum efficiency and performance. The Softeners unit equipped with a fully automatic self contained control valve (body made by glass felled norly) using a cartridge design permitting instant service with timer to automatically control the Softeners regeneration and rinse cycle on a pre set schedule, regeneration and rinse cycles are factory set to accommodate site conditions. Automatic Water Softener model fitted with Clack simplex timer controller(PS) series designed with magnum CV , CV+ osmonics or “CLACK” control valve according with softener tank size and demand flow rate for optimal performance. softener tank suitable for a working pressure of 689 KPa (100 psi) and tested at 50 % in excess of the working pressure, 100% corrosion resistant high performance composite and fibre-glass reinforced polyester construction, The inner shell of softeners are both temperature and chemical resistant and shell height design to allow a minimum free board space of 100% of the resin bed depth for adequate expansion during regeneration cycle with maximum pressure drop (8) psi. The Automatic Water Softener model fitted with Clack simplex timer controller(PS) series are designed with self cleaning distributors exhibit excellent flow rates and are cleaned automatically by the pressure of the water flow during the rinse cycle, and riser tube with large diameter to allow higher flow rates for optimum water production whenever required. A water softener reduces hardness in water by removing the calcium and magnesium ions in the water, and replacing them with sodium ions, which do not lead to any form of scale build-up or precipitation. A standard water softener consists of 2 vessels. The first vessel contains a sodium coated zeolite ion exchange resin. Water passes through the resin vessel under pressure, flowing over the softener resin, which attracts the calcium and magnesium ions to its surface, exchanging them for sodium ions. Once the softener resin has reached the end of its service cycle and can hold no more calcium and magnesium, the water softener automatically starts a regeneration cycle, drawing a solution of brine from the second vessel, the brine tank, into the softener resin vessel. The brine solution washes the softener resin, causing the calcium and magnesium ions to be washed to drain, and the resin to be regenerated with sodium ions. After a period of time (90-180 minutes, depending on the softener size and configuration), the resin vessel automatically rinses itself with clean water and switches back into service, ready to start softening water again. The system also automatically adds more water to the salt in the brine tank to produce more brine for the next regeneration cycle. All water softeners supplied by 4 Ever Pure Water are fully automatic. The only operator assistance required is the addition of salt to the softener's brine tank occasionally.