Rizhao Garnet Ltd - Products

The most common sizes used in Water Filtration are 0.3 / 0.6mm and 1.4 / 2.36mm. However, almost any size between 0.1 and 3.00mm can be made for customers specific requirements Garnet is a naturally occuring mineral (Almandine) with very uniform physical chemical and micro-structural properties. There are no free elements, all oxides are combined chemically as an iron rich aliminosilicate.

CN Garnet are well suited to most fields of surface preparation industry, with or without subsequent coatings in particular: offshore rig Building and structural steel Steel structure bridge Construction and maintenance of chemical plants, nuclear and fossil power stations, gas and sewerage plants, desalination and industrial plants. Construction and maintenance of containers and tanks, tank trucks and rail tanks, wagons and coaches Non ferrous surfaces and turbine blades (special mesh). Oil and petrochemical maintenance in refineries and storage tanks including on shore and off shore installations Shipyards, new building, conversion and repair including antimagnetic and other special steels as well as aluminium super structures and aluminium and fibreglass hulls. Stainless Steel. Stone building facades and monuments

CN Garnet waterjet cutting abrasives are extensively used in all renowned waterjet cutting machines around the world. Using the worlds best processing methods not only provides the highest purity garnet and highly accurate sizing of grains but ensures that there is no dust or ineffective fine grains to restrict garnet free flow with no oversize grains to block focusing tubes. A steady flow of garnet abrasives to the focusing tube that is free from blockages allows uninterrupted production without downtime resulting in optimum efficiency and lowest production costs.In addition, our crushed almandine rock garnet keeps more angular and sharper edges and increases the cutting speed significantly. Applications CNTM Garnet Waterjet cutting abrasives’ grades are available to meet all of your specific project requirements. It is ideally suited for all applications including: ● Aluminium ● Granite ● FRP / CRP ● Carbon Steel ● Marble ● Glass ● Copper ● Rubber ● Stainless Steel ● Wood ● Titanium

CN Jadeblast blasting abrasive consists of a totally naturally occurring blend of Green Almandine Rock Garnet and Red Almandine Rock Garnet, both known for natural hardness, durability and abrasive characteristics. CN Jadeblast is an ideal blasting abrasive free of any heavy metals or toxic components and meets all occupational health and safety requirements. The unique blend of Green Almandine Rock Garnet and Red Almandine Rock Garnet gives CN Jadeblast a superior cutting speed and surface profile over most commonly used abrasives. Jadeblast is a general purpose blasting abrasive used in steel fabrication and bridge maintenance to remove rust, mill scale and weathered coatings. Jadeblast, at typically less than 0.5% free silica and total chlorides of typically 10-13ppm, meets even the most stringent industry and military specifications. Jadeblast grains clean deep into cavities and pitted areas down to bare metal, thoroughly removing all rust, soluble salts and other contaminants. The blasted surface is free of embedments and free of rogue peaks and troughs. SA3 white metal is achieved easily and an even surface profile of 45-55 microns and 55-75microns. Jadeblast is non-toxic blasting abrasive. There is no silicosis hazard, leachable heavy metals or radioactive contaminants.

CNTM Garnet are composed of natural Almandine rock garnet grains and has been famous for its natural hardness, more angular, sharper edges, durability and abrasive characteristics, that meet all Occupational Health and Safety requirements, as well as being environmentally inert. Benefiting from its natural almandine rock garnet mine resource in North China, CN Garnet abrasives provide a perfect symbiosis of grain size, density and hardness/durability ensuring optimum abrasive efficiency in terms of lowest abrasive consumption and highest production rates at safe environmental and health conditions. It is a cost effective alternative to silica sand, mineral slags, steel grits and shot due to low consumption (kg/m2) and high productivity (m2/hr) and the superior toughness and low friability enables it to be recycled 6 -10 times depending on the application Mined by the leading producer of industrial garnet，Rizhao Garnet Ltd in North part of China, CN Garnet abrasives are processed to the highest quality standards in respect of mineral purity and meet the stringent requirements of ISO 11126-10:2000E for chloride and free silica content. It is free of metallic iron making it suitable for all areas of surface preparation including stainless steel, anti-magnetic steel and all specialty alloys. Special fine grades of CN Garnet abrasives are also available for aluminum, turbine blades, fibreglass and other specialist surface preparation applications.